Welding Estimator Job Interview Questions And Answers

Download Welding Estimator Job Interview Questions and Answers PDF

78 Welding Estimator Questions and Answers:

Welding Estimator Interview Questions Table of Contents

Welding Estimator Job Interview Questions And Answers
Welding Estimator Job Interview Questions and Answers

1 :: Top 13 Situational Interview Questions In Welding Estimator:

Situational interviews In Welding Estimator are similar to behavioral interview questions - but they are focused on the future, and ask hypothetical questions, whereas behavioral interview questions look at the past.

The advantage is that employers can put all candidates in the same hypothetical situations, and compare their answers.


1. What would you do if you made a strong recommendation in a meeting, but your colleagues decided against it?

2. How you would handle it if your team resisted a new idea or policy you introduced?

3. How would you handle it if the priorities for a project you were working on were suddenly changed?

4. What would you do if the work of an employee you managed didn't meet expectations?

5. What would you do if an important task was not up to standard, but the deadline to complete it had passed?

6. What steps would you take to make an important decision on the job In Welding Estimator?

7. How would you handle a colleague you were unable to form a positive relationship with?

8. What would you do if you disagreed with the way a manager wanted you to handle a problem?

9. What would you do if you were assigned to work with a difficult client In Welding Estimator?

10. What would you do if you worked hard on a solution to a problem, and your solution was criticized by your team?

11. How would you handle working closely with a colleague who was very different from you?

12. You're working on a key project that you can't complete, because you're waiting on work from a colleague. What do you do?

13. You realize that an early mistake in a project is going to put you behind deadline. What do you do?
Read More

2 :: If you have multiple projects on your plate, how do you handle completing them on time?

Prioritize based on business importance. Set clear timelines for each so that you know which ones to knock out first. Get your teammates to help if necessary.
Read More

3 :: Tell me about a time when you had to think strategically?

There was a time when I was told I had to get rid of 20% of my people. I had to determine which persons I needed the most by determining who could do what. I had to put aside personal feelings so that I could keep a working crew to handle he same workload with less people.
Read More

4 :: What has disappointed you about a previous job?

Again, this question could get you in trouble so tread carefully. Some good answers might be that your previous job didn't provide any room for growth, that you were laid off due to a mandatory reduction in staff, that they closed their office in your state and required you to relocate, etc. Make sure not to mention anything negative about the people you worked with, the company in general or the job itself.
Read More

5 :: Did you consider yourself a team player?

Of course you're a team player - who isn't. But a simple yes probably isn't the response the interviewer is looking for. Be ready to provide specific example of how you've worked as part of a cohesive team to get things accomplished and how you've focus on team performance rather than individual performance. Make sure not to brag as this will make it appear as that you're more concerned about your own performance and accomplishments than those of the team.
Read More

6 :: Top 11 Questions to Verify Experience and Credentials In Welding Estimator:

Sometimes people want a job a little too bad - and they may fudge their credentials and experience a bit.

If you've run into this problem, are worried about it, or have credentials and experience that are absolutely essential, you may need to ask a few verification questions.

If you are a candidate, you should review your resume and make sure you know all the key points, and that nothing has been misconstrued.


1. What grades did you get in college?

2. What were your responsibilities when you worked in job x?

3. How many people were on your team at your last job?

4. What will your previous manager/supervisor say when I ask where you needed to improve?

5. What was your beginning and ending salary at job x?

6. What were your beginning and ending titles at job x?

7. Are you eligible for rehire at job x?

8. What tools are necessary for performing job x?

9. Describe to me how you would perform [x typical job task].

10. What was the focus of your thesis?

11. When did you leave company x?
Read More

7 :: Why do you think you'll do well at this job?

Provide several reasons including skills, experience and interest. If you can show how you've been successful in a similar career field or job position that will go along way to helping the interviewer believe you'll also be successful at this new job.
Read More

8 :: What have you done to improve your skills over the past year In Welding Estimator?

You'll want to be prepare with some very specific examples of what you've done over the last year and what you're currently doing to improve your professional knowledge and skill set as well as anything else you're doing the shows self improvement.
Read More

9 :: What kind of work interests you the least In Welding Estimator?

What bores you? What fails to challenge you? What fails to excite you?
Read More

10 :: What do you consider ethical spending on an expense account?

It depends on the role - but the better way to answer this is to ask the interviewer what their expectations are with regards to what the role can expense and then simply state that you'll stay within those parameters
Read More

11 :: Do you consider yourself successful?

You should always answer yes to this question. Briefly explain why without going on and on. If you communicate that you're more successful than you really are you may come off as arrogant or unrealistic. A goof explanation is that you have set professional goals and that you have met some of these goals and are on track to meet more in the near future.
Read More

12 :: Tell me about a time when you had to give someone difficult feedback In Welding Estimator?

By asking this question, your interviewer hopes to learn whether you can communicate effectively, address issues in the workplace and motivate others during difficult times. Giving negative feedback requires honesty, thoughtfulness and tact. Answering this question well can help show an interviewer that you would be a good fit for a managerial position or a position that involves working closely with others.
Read More

13 :: Tell me about a time when you had to use your presentation skills to influence someone's opinion In Welding Estimator?

Example stories could be a class project, an internal meeting presentation, or a customer facing presentation.
Read More

14 :: What makes you right for this position?

This question can be tricky because you need to show your worth In Welding Estimator without sounding cocky or arrogant. Research the business ahead of time and become familiar with its mission and values. Take the time to figure out how your personal qualities fit the needs of the business and use that fit to provide your answer.
Read More

15 :: Are you good at working in a team In Welding Estimator?

Before you answer, consider how you best contribute to a team:

☛ Do you get along easily with people?
☛ Are you an effective collaborator?
☛ Can you communicate with people from various backgrounds and with different personalities?
☛ Can you motivate people?
☛ Do you know how to push back tactfully?
☛ Can you mediate conflicts?
☛ Can you deal with difficult personalities?
Read More

16 :: Explain what are your strengths In Welding Estimator?

Bad Answer: Candidate is unprepared for question or only gives generic answers.

This is the most common job interview question - everybody should be expecting it. If they don't seem prepared, or give a fairly stock answer, it's probably a bad sign.

Good answer: The consensus is to go for quality, not quantity here. Candidates should give a short list of strengths, and back each one up with examples that illustrate the strength. Also, they should explain how these strengths will be useful in the job you’re applying for, and use this question to say something interesting about themselves.
Read More

17 :: What's your management style?

The best managers are strong but flexible, and that's exactly what you want to show off in your answer. (Think something like, “While every situation and every team member requires a bit of a different strategy, I tend to approach my employee relationships as a coach...”) Then, share a couple of your best managerial moments, like when you grew your team from five to 15 or coached an underperforming employee to become the company's top employee.
Read More

18 :: Why did you select the University _______?

Discuss the academic program, the extracurricular program(s), the school spirit, the quality of your peers, and the professors.
Read More

19 :: What motivates you at the work place?

Keep your answer simple, direct and positive. Some good answers may be the ability to achieve, recognition or challenging assignments.
Read More

20 :: How do you prioritize your work?

Depends on the situation... I like to label certain tasks as either A B or C...A being the one that requires immediate attention, and C which are tasks that aren't urgent but eventually need to get done... I like to focus my work In Welding Estimator on the things that need to get done, and done quickly... While balancing the other work alongside our first priorities.
Read More

21 :: What motivates you?

I've always been motivated by the challenge – in my last role, I was responsible for training our new recruits and having a 100% success rate in passing scores. I know that this job is very fast-paced and I'm more than up for the challenge. In fact, I thrive on it.
Read More

22 :: Give me an example of how you handled pressure at work In Welding Estimator?

The company is looking to see if you can handle pressure well. Share with them an example where you were able to stay calm during a pressure filled situation (perhaps it was a deadline, or there was an emergency with a customer occurring). Discuss the situation, your reaction and steps you took to resolve it and the outcome.
Read More

23 :: Give me an example of a time when you were able to successfully communicate with another person even when that individual may not have personally liked you (or vice versa). How did you handle the situation? What obstacles or difficulties did you face? How did you deal with them?

First, the key is to state the differences in personality to give the interviewer some background. Second, you want to discuss how that was affecting the situation. Third, show how you were able to adapt to the way the person wanted to be communicated with to achieve your goals
Read More

24 :: What role are you ready to take in a group?

Ideally, you want to take on the role you're interviewing for, but you want to be flexible with your responsibilities In Welding Estimator if there are any changes.
Read More

25 :: Are you willing to work overtime or odd hours?

Be completely honest. You don't want to lie to get the job if you're not going to work the hours required.
Read More

26 :: What do you do in your spare time?

If you want to show your fun side, discuss your extracurricular activities. If you want to show your ambition, discuss the work / school projects you do in your spare time.
Read More

27 :: Suppose there are three light switches outside a room. Inside is a single light bulb, controlled by one of the three switches. You need to determine which switch operates the bulb. You can turn the switches on and off as many times as you wish (they are all off to begin with), but may only enter the room once. There is no one there to help you. The door to the room is closed, and there are no windows, so you cannot see inside. How can you discover which switch operates the bulb?

Do the following steps:
☛ 1. Turn ON two switches, and leave one OFF.
☛ 2. Wait a few minutes.
☛ 3. Turn one switch from ON to OFF. One is now ON and two are OFF
☛ 4. Enter the room. - If the light is ON, it is controlled by the switch you left ON. - If the light bulb is OFF, touch it. If it is warm it is controlled by the switch you turned ON and OFF. If it is cold, it is controlled by the switch you never turned on.
Read More

28 :: What will your ramp time be before you become a meaningful contributor?

Companies want staff that can ramp quickly, but also want people who are realistic. So take into consideration how intense the job is and then give a good answer. For example, if you have simple responsibilities that don't require a huge development curve, then your ramp time will probably be shorter. If it's a complex set of skills that you need to develop, then your ramp time could be longer - the key is you have to explain why you believe that ramp time should be.
Read More

29 :: What are your personal skills which make you a candidate for the position In Welding Estimator?

The list of crucial character traits includes patience, tact, and poise, with personal and cultural sensitivity. One needs the ability to work long hours, with much walking and some physical tasks. But the most important trait of all is to love people and to have the desire to care for them.
Read More

30 :: Describe your academic achievements?

Think of a time where you really stood out and shined within college. It could be a leadership role in a project, it could be your great grades that demonstrate your intelligence and discipline, it could be the fact that you double majored. Where have you shined?
Read More