Voice Gateways Interview Questions & Answers Download PDF
Enhance your Telecom Voice Gateways interview preparation with our set of 9 carefully chosen questions. These questions are specifically selected to challenge and enhance your knowledge in Telecom Voice Gateways. Perfect for all proficiency levels, they are key to your interview success. Download the free PDF to have all 9 questions at your fingertips. This resource is designed to boost your confidence and ensure you're interview-ready.
9 Telecom Voice Gateways Questions and Answers:
Telecom Voice Gateways Job Interview Questions Table of Contents:
1 :: What is the time taken for 1 satellite hop in voice communication?
The satellite delay for single hop SCPC link is about
525-550ms. But for TDMA network, the delay varies
between 550ms - 700ms.
525-550ms. But for TDMA network, the delay varies
between 550ms - 700ms.
2 :: Tell me What is the Max number of satellite hops allowed in voice communication?
Logically speaking, whatever be the number of hops, the
fixed delay should not go more than 150ms (one-way).
fixed delay should not go more than 150ms (one-way).
3 :: Do you know What is the maximal decimal number that can be accommodated in a byte?
256
SINCE, 1 BYTE=8 BITS
THE LOGIC IS 2^8=256(2 TO THE POWER OF 8)
SINCE, 1 BYTE=8 BITS
THE LOGIC IS 2^8=256(2 TO THE POWER OF 8)
4 :: Explain At which Frequency VOICE is sampled?
if you sample a signal in regular
intervals of at least twice the highest channel frequency,
the sample will contain enough information to accurately
reconstruct the signal.
Human Audible Range: 20 – 20,000 Hz
Human Speech: 200 – 9000 Hz
Telephone channel: 300 – 3,400 Hz
Nyquist theorem: 300 – 4000 Hz
Sample size = (2 * 4000) 8000, 8000 * 8 bits =
64,000 bps = 64 kbps
intervals of at least twice the highest channel frequency,
the sample will contain enough information to accurately
reconstruct the signal.
Human Audible Range: 20 – 20,000 Hz
Human Speech: 200 – 9000 Hz
Telephone channel: 300 – 3,400 Hz
Nyquist theorem: 300 – 4000 Hz
Sample size = (2 * 4000) 8000, 8000 * 8 bits =
64,000 bps = 64 kbps
5 :: Explain What is the Purpose of PC(Program Counter) in a MicroProcessor?
Program Counter in a microprocessor (or CPU) is a pointer
instruction of the program to tell where the CPU to look
for the next instruction.
instruction of the program to tell where the CPU to look
for the next instruction.
6 :: Tell me What action is taken when the processor under execution is interrupted by a non-maskable interrupt?
non maskable interrupt r those 2 whom processor must have 2 respond instantly.....
4 maskable interrupts it should complete current instruction n then come over it..
4 maskable interrupts it should complete current instruction n then come over it..
7 :: Do you know What is the nominal voltage required in subscriber loop connected to local exchange?
+48 voltsb) -48 voltsc)
8 :: Explain the type of signaling used between two exchanges?
In Band (Single Frequency, Multi-Frequency (MF), and Dual-Tone Multi-Frequency (DTMF)), Common Channel Signalling (CCS) and Signalling System 7 (SS7) is used Between the exchanges.
But CCS and SS7 are more cheaper than MF.
But CCS and SS7 are more cheaper than MF.
9 :: What is buffering?
It is the process of temporarily storing the data so that
the data is available for some activity (re-sequencing etc.)
The result of this is delay in delivery of the packets and
hence, variation in speed of packet delivery.
the data is available for some activity (re-sequencing etc.)
The result of this is delay in delivery of the packets and
hence, variation in speed of packet delivery.
