Flexographic printing Interview Preparation Guide
Download PDF

70 Flexographic printing Questions and Answers:

1 :: Did you consider yourself a team player?

Of course you're a team player - who isn't. But a simple yes probably isn't the response the interviewer is looking for. Be ready to provide specific example of how you've worked as part of a cohesive team to get things accomplished and how you've focus on team performance rather than individual performance. Make sure not to brag as this will make it appear as that you're more concerned about your own performance and accomplishments than those of the team.

2 :: Top 11 Questions to Verify Experience and Credentials In Flexographic printing:

Sometimes people want a job a little too bad - and they may fudge their credentials and experience a bit.

If you've run into this problem, are worried about it, or have credentials and experience that are absolutely essential, you may need to ask a few verification questions.

If you are a candidate, you should review your resume and make sure you know all the key points, and that nothing has been misconstrued.


1. What grades did you get in college?

2. What were your responsibilities when you worked in job x?

3. How many people were on your team at your last job?

4. What will your previous manager/supervisor say when I ask where you needed to improve?

5. What was your beginning and ending salary at job x?

6. What were your beginning and ending titles at job x?

7. Are you eligible for rehire at job x?

8. What tools are necessary for performing job x?

9. Describe to me how you would perform [x typical job task].

10. What was the focus of your thesis?

11. When did you leave company x?

3 :: Why are you leaving last job?

Although this would seem like a simple question, it can easily become tricky. You shouldn’t mention salary being a factor at this point In Flexographic printing. If you’re currently employed, your response can focus on developing and expanding your career and even yourself. If you’re current employer is downsizing, remain positive and brief. If your employer fired you, prepare a solid reason. Under no circumstance should you discuss any drama or negativity, always remain positive.

4 :: Why do you want to leave your current company In Flexographic printing?

Bad Answer: Complaining about or blaming their former job, boss or colleagues. Also, having no good reason.

Good answer: One that focuses on the positives about why the job they're applying for offers them better learning or career opportunities, chances for advancement, aligns more closely to their long term goals, or is a better fit for them.

5 :: Top 13 Situational Interview Questions In Flexographic printing:

Situational interviews In Flexographic printing are similar to behavioral interview questions - but they are focused on the future, and ask hypothetical questions, whereas behavioral interview questions look at the past.

The advantage is that employers can put all candidates in the same hypothetical situations, and compare their answers.


1. What would you do if you made a strong recommendation in a meeting, but your colleagues decided against it?

2. How you would handle it if your team resisted a new idea or policy you introduced?

3. How would you handle it if the priorities for a project you were working on were suddenly changed?

4. What would you do if the work of an employee you managed didn't meet expectations?

5. What would you do if an important task was not up to standard, but the deadline to complete it had passed?

6. What steps would you take to make an important decision on the job In Flexographic printing?

7. How would you handle a colleague you were unable to form a positive relationship with?

8. What would you do if you disagreed with the way a manager wanted you to handle a problem?

9. What would you do if you were assigned to work with a difficult client In Flexographic printing?

10. What would you do if you worked hard on a solution to a problem, and your solution was criticized by your team?

11. How would you handle working closely with a colleague who was very different from you?

12. You're working on a key project that you can't complete, because you're waiting on work from a colleague. What do you do?

13. You realize that an early mistake in a project is going to put you behind deadline. What do you do?

6 :: What has disappointed you about a previous job?

Again, this question could get you in trouble so tread carefully. Some good answers might be that your previous job didn't provide any room for growth, that you were laid off due to a mandatory reduction in staff, that they closed their office in your state and required you to relocate, etc. Make sure not to mention anything negative about the people you worked with, the company in general or the job itself.

7 :: Why are you interested in working In Flexographic printing for [insert company name here]?

Bad Answer: They don't have a good reason, or provide a generic answer, "I think it represents a great opportunity."

Good answer: One that shows they've done research on the company, and are truly excited about specific things they can do at the job. This not only shows enthusiasm for the work and basic preparation skills, gives you clues about the cultural fit.

8 :: What qualities do you look for in a boss?

Remain optimistic and do not be too specific. Good attributes include moral character, honesty, and intelligence since managers usually believe they possess these qualities.

9 :: What is your greatest professional achievement?

Nothing says “hire me” better than a track record of achieving amazing results in past jobs In Flexographic printing, so don't be shy when answering this interview question! A great way to do so is by using the S-T-A-R method: Set up the situation and the task that you were required to complete to provide the interviewer with background context (e.g., “In my last job as a Flexographic printing, it was my role to manage the invoicing process”), but spend the bulk of your time describing what you actually did (the action) and what you achieved (the result). For example, “In one month, I streamlined the process, which saved my group 10 man-hours each month and reduced errors on invoices by 25%.”

10 :: Have you ever been caught stealing, or better yet, have you ever stole anything?

I guess everyone takes a pen or paper or little things like that. But other than that, NO. I have never stole from my employers or better yet In Flexographic printing, from anyone.

11 :: What have you learned from mistakes on this job?

Candidates without specific examples often do not seem credible. However, the example shared should be fairly inconsequential, unintentional, and a learned lesson should be gleaned from it. Moving ahead without group assistance while assigned to a group project meant to be collaborative is a good example.

12 :: What did you like least about your last (or current) job In Flexographic printing?

Don't vent or focus on the negative with brutally honest answers such as "My boss was a jerk," or "The company culture was too politically correct," or "They just weren't giving me the opportunity to take my career to the next level." Instead, keep the emphasis on the positive, even though there are sure to be things you weren't happy about.

13 :: Tell me about a time when you successfully handled a situation?

For this question, the interviewer wants to know what you do in a situation that doesn’t have a clear answer. This will help the interviewer know how you respond to unforeseen challenges.

14 :: Explain what are your strengths In Flexographic printing?

Bad Answer: Candidate is unprepared for question or only gives generic answers.

This is the most common job interview question - everybody should be expecting it. If they don't seem prepared, or give a fairly stock answer, it's probably a bad sign.

Good answer: The consensus is to go for quality, not quantity here. Candidates should give a short list of strengths, and back each one up with examples that illustrate the strength. Also, they should explain how these strengths will be useful in the job you’re applying for, and use this question to say something interesting about themselves.

15 :: Are you able to relocate if required?

Be completely honest and thoughtful with this one. You don't want to wake up one to find out that you're moving to a new city or state and it may be a major factor in your eligibility for employment. But again, if you don't want to move then the job probably isn't for you.

16 :: How long do you want to work for us if we hire you?

Here being specific is probably not the best approach. You may consider responding, “I hope a very long time.” Or “As long as we're both happy with my performance.”

17 :: Tell me about the most fun you have had on the job?

When answering this question, discuss situations where you completed tasks benefitting your previous employers.

18 :: Explain me about a problem or disagreement you had with previous supervisor?

This question is trap. It is meant to see whether or not you'll speak poorly of an employer. No one wants to hire someone who's going to speak poorly of them down the road. Stay upbeat and positive - and most of all don't say anything negative about a previous employer.

19 :: Describe your work ethic?

While discussing this, be sure to stress specific examples of what you bring to the company. Good qualities include resolve to fulfill job responsibilities, optimism, and a desire to be as efficient as possible while at work.

20 :: What are your strengths In Flexographic printing?

This is one of the most common questions you will be asked. Give an answer relevant to the skills and qualities relevant to the position you are applying to. The interviewer is trying to find if your strengths match the job. For example, if you are applying for a job In Flexographic printing where accuracy is an important issue, one of your strengths could be that you have an eye for detail. It may useful to find different words to describe similar attributes and qualities in order to avoid repetition.

21 :: What are you looking for in a new position In Flexographic printing?

I’ve been honing my skills In Flexographic printing for a few years now and, first and foremost, I’m looking for a position where I can continue to exercise those skills. Ideally the same things that this position has to offer. Be specific.

22 :: Why do you want to work for this company?

Again be honest. The interviewer will be able to sense very quickly if you're be disingenuous. Your answer should be base on your person reasons, career aspirations as well as research you've performed on the company. The most important thing you should do is make sure to relate your answer to your long-term career goals.

23 :: What do you know about our company?

You always want to make sure that you're pretty familiar with the company that you're interviewing with. Nothing looks worse than a candidate who knows nothing about the company they say they're interested in working for. Find out everything you can about the company, its culture and its goals. You will also want to know how the company is positioned in its market as well as who its major competitors are.

24 :: How well do you know this industry?

Two things businesses need to pay attention to in their industries are what their competition is doing and the customers. You may not always agree with your competitors but it is important to be aware of what changes they are making. Very well. I have been in the industry for over 6 years.

25 :: What can you tell me about team work as part of the job In Flexographic printing?

There is usually a team of staff nurses working in cooperation with each other. A team of nurses has to get along well and coordinate their actions, usually by dividing their responsibilities into sectors or specific activities. They help each other perform tasks requiring more than one person.

26 :: What is your greatest failure In Flexographic printing, and what did you learn from it?

When I was in college, I took an art class to supplement my curriculum. I didn't take it very seriously, and assumed that, compared to my Engineering classes, it would be a walk in the park. My failing grades at midterm showed me otherwise. I'd even jeopardized my scholarship status. I knew I had to get my act together. I spent the rest of the semester making up for it, ended up getting a decent grade in the class. I learned that no matter what I'm doing, I should strive to do it to the best of my ability. Otherwise, it's not worth doing at all.

27 :: Do you work well on a team? How would you define teamwork?

I would define team work as getting the job done In Flexographic printing whether that means if I have to do more then the guy next to me as long as the work gets finished.

28 :: If you have seven white socks and nine black socks in a drawer, how many socks do you have to pull out blindly in order to ensure that you have a matching pair?

if the first one is one color (say, white), and the second one is the other color (black), then the third one, no matter what the color, will make a matching pair. (Sometimes you're not supposed to think that hard.)

29 :: What have you done to reduce costs, increase revenue, or save time?

Even if your only experience is an internship, you have likely created or streamlined a process that has contributed to the earning potential or efficiency of the practice. Choose at least one suitable example and explain how you got the idea, how you implemented the plan, and the benefits to the practice.

30 :: How would you describe your approach to Flexographic printing?

In more general terms, a question such as this gives a candidate the opportunity to talk about their professional philosophy and skills. While the question is general in nature, the best answers are usually quite specific, picking one or two points and exemplifying them with instances from personal history.