Tricky Rubber Goods Inspector Interview Preparation Guide
Download PDF

78 Rubber Goods Inspector Questions and Answers:

Table of Contents

Tricky  Rubber Goods Inspector Job Interview Questions and Answers
Tricky Rubber Goods Inspector Job Interview Questions and Answers

1 :: Do you know anyone that works with our company?

Sometimes companies have policies relating to the hiring of individuals related to current company employees. If you are related to anyone working for the company make sure you're aware of company policies before you enter the interview. If you have a friend or acquaintance working for the company make sure have good relationship with this individual before mentioning them.

2 :: Top 11 Questions to Verify Experience and Credentials As Rubber Goods Inspector:

Sometimes people want a job a little too bad - and they may fudge their credentials and experience a bit.

If you've run into this problem, are worried about it, or have credentials and experience that are absolutely essential, you may need to ask a few verification questions.

If you are a candidate, you should review your resume and make sure you know all the key points, and that nothing has been misconstrued.


1. What grades did you get in college?

2. What were your responsibilities when you worked in job x?

3. How many people were on your team at your last job?

4. What will your previous manager/supervisor say when I ask where you needed to improve?

5. What was your beginning and ending salary at job x?

6. What were your beginning and ending titles at job x?

7. Are you eligible for rehire at job x?

8. What tools are necessary for performing job x?

9. Describe to me how you would perform [x typical job task].

10. What was the focus of your thesis?

11. When did you leave company x?

3 :: Tell us about a typical day at work. How does it start? What do you do?

At the beginning of each day, I inspect the work site to make sure that it is hazard-free. Once the work site is secured, I verify that all tools and equipment are adequate in supply. As soon as the work orders are delivered, I provide workers with security guidelines and carry out drills. During the workday, it is my duty to monitor workers to ensure that they are working according to the enforced safety policies and that any problems or accidents are quickly addressed.

4 :: What have you learned from mistakes on the job?

Candidates without specific examples often do not seem credible. However, the example shared should be fairly inconsequential, unintentional, and a learned lesson should be gleaned from it. Moving ahead without group assistance while assigned to a group project meant to be collaborative is a good example.

5 :: Have you ever you have been in a position As Rubber Goods Inspector where you've had to fire someone? How did you feel about that experience?

Be very thoughtful about your answer. This is a very serious matter for most companies and requires a very serious answer. You need to express that you will do it when it is the right thing to do but you don't want to give the impression that you're callus to the process. Don't forget that firing is not the same as laying someone off - it typically is for the direct benefit of the company.

6 :: Who are your heroes?

Have at least one person you consider a hero or role model. Be ready to explain why they are a hero to you and how they've inspired you to be a better person.

7 :: What has disappointed you about a previous job?

Again, this question could get you in trouble so tread carefully. Some good answers might be that your previous job didn't provide any room for growth, that you were laid off due to a mandatory reduction in staff, that they closed their office in your state and required you to relocate, etc. Make sure not to mention anything negative about the people you worked with, the company in general or the job itself.

8 :: What do you know about our company?

You always want to make sure that you're pretty familiar with the company that you're interviewing with. Nothing looks worse than a candidate who knows nothing about the company they say they're interested in working for. Find out everything you can about the company, its culture and its goals. You will also want to know how the company is positioned in its market as well as who its major competitors are.

9 :: Give me an example of how you handled pressure at work As Rubber Goods Inspector?

The company is looking to see if you can handle pressure well. Share with them an example where you were able to stay calm during a pressure filled situation (perhaps it was a deadline, or there was an emergency with a customer occurring). Discuss the situation, your reaction and steps you took to resolve it and the outcome.

10 :: What is your personal mission statement?

Is it to conquer the world? Is it to become a CEO? Is it to give back to the community? Is it to inspire others? Define your statement by stating a clear vision of how you want to make an impact on the world with your work.

11 :: What do you like to do for fun?

Be open to sharing hobbies and activities that you enjoy. Make sure you're genuine about it and don't list off things you don't really like because if they ask you a follow up question it'll be harder for you to answer.

12 :: What do you like to do?

Discuss your passions As Rubber Goods Inspector. Ideally if it's work related that's fantastic! If not, talk about your academic / extracurricular passions and WHY you enjoy them. For example: I love playing sports because of the team work aspect - it's fun winning together! (This example shows you're a team player)

13 :: What is your greatest strength As Rubber Goods Inspector?

This is your time to shine. Just remember the interviewer is looking for work related strengths As Rubber Goods Inspector. Mention a number of them such as being a good motivator, problem solver, performing well under pressure, being loyal, having a positive attitude, eager to learn, taking initiative, and attention to detail. Whichever you go for, be prepared to give examples that illustrate this particular skill.

14 :: Are you willing to work in shifts?

If the job calls for shifts that vary, be ready to do that for your work. If you aren't open to that, then explain why and see if they can adjust it for you.

15 :: What do you see yourself doing within the first 30 days of this job?

Typically the first 30 days are designed for you to learn as much as possible As Rubber Goods Inspector. Work hard to get to know your teammates, how they work together, and how you can make the biggest impact.

16 :: How much are you willing to sacrifice to be successful at work As Rubber Goods Inspector?

With anything comes sacrifice. The questions is how much of it are you willing to sacrifice with regards to work life balance, stress, etc?

17 :: Are you willing to work overtime or odd hours?

Be completely honest. You don't want to lie to get the job if you're not going to work the hours required.

18 :: How did you become interested in this field/industry?

Describe how you've come to develop a passion or interest in this industry and use variables like "culture, people, vision, career development, and the work itself" to define your choice

19 :: What kind of work interests you the most?

You can talk about what you're passionate about. What motivates you. What excites you.

20 :: Tell me a difficult situation you have overcome in the workplace?

Conflict resolution, problem solving, communication and coping under pressure are transferable skills desired by many employers As Rubber Goods Inspector.
Answering this question right can help you demonstrate all of these traits.
☛ Use real-life examples from your previous roles that you are comfortable explaining
☛ Choose an example that demonstrates the role you played in resolving the situation clearly
☛ Remain professional at all times – you need to demonstrate that you can keep a cool head and know how to communicate with people

21 :: How do you rate yourself in computer skills? Please describe the programs and software that you can use well?

Ideally you want to able to type quickly, have the ability to effectively use Microsoft Office, and more importantly be able to quickly adapt to computer / technology skills. More and more it's become an integral part of work. If the job doesn't require technology skills - then this question shouldn't be asked!

22 :: In your last job what kinds of pressure did you encounter and how did you react As Rubber Goods Inspector?

Do not show your fear or uneasiness in handling pressure. Everyone likes to have a worker who can handle pressure calmly and with a clear train of thought. Show how you would logically come to a conclusion in a pressure filled situation.

23 :: What kind of work interests you the least As Rubber Goods Inspector?

What bores you? What fails to challenge you? What fails to excite you?

24 :: Tell me about a time when you had to make a decision without all the information you needed. How did you handle it As Rubber Goods Inspector? Why? Were you happy with the outcome?

In many scenarios, you will not have all the information needed. The key is to make the best possible decision based on what you deem to be a sufficient amount of information.

25 :: Tell me why do you want this job As Rubber Goods Inspector?

Bad Answer: No solid answer, answers that don't align with what the job actually offers, or uninspired answers that show your position is just another of the many jobs they're applying for.

Good answer: The candidate has clear reasons for wanting the job that show enthusiasm for the work and the position, and knowledge about the company and job.

26 :: Explain me about a problem or disagreement you had with previous supervisor?

This question is trap. It is meant to see whether or not you'll speak poorly of an employer. No one wants to hire someone who's going to speak poorly of them down the road. Stay upbeat and positive - and most of all don't say anything negative about a previous employer.

27 :: Describe yourself in three words?

Pick three adjectives but then back up each with a real life story that demonstrates those characteristics.

28 :: What have you done to prepare yourself to be a supervisor?

1. Learn from current supervisors (best practices)
2. Mentor others
3. Be exceptionally good at your current job so that it builds your credibility
4. Have a high emotional IQ

29 :: What type of mentors do you seek out and why?

Think of your top 3 mentors and what attributes they exhibit that you want to emulate. Common attributes include passion, desire, will, leadership, ability to influence others, intelligence.

30 :: Why did you choose your major in college or tech school?

People usually choose their major based on their passions or the career path they want to head towards.
Rubber Goods Inspector Interview Questions and Answers
78 Rubber Goods Inspector Interview Questions and Answers