Top Bench Inspector Interview Preparation Guide

Download PDF

Sometimes people want a job a little too bad - and they may fudge their credentials and experience a bit.

If you've run into this problem, are worried about it, or have credentials and experience that are absolutely essential, you may need to ask a few verification questions.

If you are a candidate, you should review your resume and make sure you know all the key points, and that nothing has been misconstrued.


1. What grades did you get in college?

2. What were your responsibilities when you worked in job x?

3. How many people were on your team at your last job?

4. What will your previous manager/supervisor say when I ask where you needed to improve?

5. What was your beginning and ending salary at job x?

6. What were your beginning and ending titles at job x?

7. Are you eligible for rehire at job x?

8. What tools are necessary for performing job x?

9. Describe to me how you would perform [x typical job task].

10. What was the focus of your thesis?

11. When did you leave company x?

No one likes to answer this question because it requires a very delicate balance. You simply can’t lie and say you don’t have one; you can’t trick the interviewer by offering up a personal weakness As Bench Inspector that is really a strength (“Sometimes, I work too much and don’t maintain a work-life balance.”); and you shouldn’t be so honest that you throw yourself under the bus (“I’m not a morning person so I’m working on getting to the office on time.”)

This is a new policy some companies are adopting. If the company you are interviewing for allows for it, then you should be thankful for the flexibility and convenience yet state that working from home is a privilege that you would honor. The key point you want to make is that you would still be able to focus and be just as productive working at home.

This question is trap. It is meant to see whether or not you'll speak poorly of an employer. No one wants to hire someone who's going to speak poorly of them down the road. Stay upbeat and positive - and most of all don't say anything negative about a previous employer.

In many scenarios, you will not have all the information needed. The key is to make the best possible decision based on what you deem to be a sufficient amount of information.

Some jobs require employees to work under stress, and some interviewers just like to see how applicants handle stressful questions.

There are many questions designed for putting the interviewee into an awkward situation, or throwing them off, to see how they do under stress. Here are some samples.

1. How do you feel this interview is going As Bench Inspector?

2. How would you handle undeserved criticism from a superior?

3. How many other jobs are you applying for?

4. What would you do if you saw a colleague stealing supplies or equipment?

5. What did you do when you had a boss you didn’t get along with?

6. What would you do if a colleague took credit for your idea, and got a promotion?

7. Was the stress of your previous job too much for you?

8. What would you do if a colleague admitted to lying on their resume to get the job?

9. What would you do if a customer verbally insulted you in front of co-workers?

10. What would you change about the design of a baseball hat?

11. Why were you fired from your previous job As Bench Inspector?

12. How successful do you think you've been so far?

When discussing a professional disappointment, make sure to discuss a scenario you could not control. Be positive about the experience and accept personal responsibility where applicable.

First of all, be honest (remember, if you get this job, the hiring manager will be calling your former bosses and co-workers!). Then, try to pull out strengths and traits you haven't discussed in other aspects of the interview As Bench Inspector, such as your strong work ethic or your willingness to pitch in on other projects when needed.

Be completely honest and thoughtful with this one. You don't want to wake up one to find out that you're moving to a new city or state and it may be a major factor in your eligibility for employment. But again, if you don't want to move then the job probably isn't for you.

Again, this question could get you in trouble so tread carefully. Some good answers might be that your previous job didn't provide any room for growth, that you were laid off due to a mandatory reduction in staff, that they closed their office in your state and required you to relocate, etc. Make sure not to mention anything negative about the people you worked with, the company in general or the job itself.

Do you want to be an entry level worker As Bench Inspector? Do you want to be a leader? Do you want to be an entrepreneur? Do you want to be a philanthropist? Do you want to be in middle management? Ask yourself these questions to figure it out.

Here are a few you could choose from:
Hard working, strong willed, persistent, intelligent, adept, amicable, friendly, collaborative, eager, humble.

Remain optimistic and do not be too specific. Good attributes include moral character, honesty, and intelligence since managers usually believe they possess these qualities.

Bad Answer: Candidate is unprepared for question or only gives generic answers.

This is the most common job interview question - everybody should be expecting it. If they don't seem prepared, or give a fairly stock answer, it's probably a bad sign.

Good answer: The consensus is to go for quality, not quantity here. Candidates should give a short list of strengths, and back each one up with examples that illustrate the strength. Also, they should explain how these strengths will be useful in the job you’re applying for, and use this question to say something interesting about themselves.

For most jobs, communication skills As Bench Inspector are important. It's hard to work as a team if people aren't communicating well.

At some jobs, like customer service or sales, communication skills are an absolute essential.

These questions are meant to help gauge a candidate's ability to communicate.

1. How do you prefer to build rapport with others?

2. How would you go about simplifying a complex issue in order to explain it to a client or colleague?

3. How would you go about persuading someone to see things your way at work?

4. How would you go about explaining a complex idea/problem to a client who was already frustrated?

5. What would you do if you there was a breakdown in communication at work?

6. Talk about a successful presentation you gave and why you think it did well.

7. How would you explain a complicated technical problem to a colleague with less technical understanding?

8. Do you prefer written or verbal communication As Bench Inspector?

9. Describe a time when you had to be careful talking about sensitive information. How did you do it?

10. What would you do if you misunderstood an important communication on the job?

11. Talk about a time when you made a point that you knew your colleagues would be resistant to.

12. Is it more important to be a good listener or a good communicator As Bench Inspector?

13. Tell me about a time you had to relay bad news to a client or colleague.

14. Rate your communication skills on a scale of 1 to 10. Give examples of experiences that demonstrate the rating is accurate.

15. How have you handled working under someone you felt was not good at communicating?

Discuss your work experiences. The key is to show you're calm under pressure and can handle sensitive situations with a clear train of thought.

First ask yourself that question before the interview - what are your priorities? Are money and success actual one in the same goal for you? If not, what's more important based on how do you define success?

This is a great opportunity for you to discuss how you've given back to the community, how you've achieved in a competitive extracurricular activity (think sports or clubs), how you've mentored others, and so forth.

Analyze the problem As Bench Inspector. Discuss possible remedies and resulting outcomes. Decide on the remedy and track results. Re-visit problem if it's not resolved.

The interviewer is asking this question to find out what your true passion is. Ideally it aligns to the type of work you're interviewing for. If not, tie it back in terms of how it relates to the job, for example, "I believe I'll learn the necessary skills in this job to pursue my passion later on in life."

"Ego" should be replaced by confidence. It's good to be confident as it shows that you know what you're doing. However, a big ego is when confidence spirals out of control and you become arrogant.

Don't be thrown off by this question—just take a deep breath and explain to the hiring manager why you've made the career decisions As Bench Inspector you have. More importantly, give a few examples of how your past experience is transferable to the new role. This doesn't have to be a direct connection; in fact, it's often more impressive when a candidate can make seemingly irrelevant experience seem very relevant to the role.

OK, if you get the admittedly much tougher follow-up question as to why you were let go (and the truth isn't exactly pretty), your best bet is to be honest (the job-seeking world is small, after all). But it doesn't have to be a deal-breaker. Share how you’ve grown and how you approach your job and life now as a result. If you can position the learning experience as an advantage for this next job, even better.

Seemingly random personality-test type questions like these come up in interviews generally because hiring managers want to see how you can think on your feet. There's no wrong answer here, but you'll immediately gain bonus points if your answer helps you share your strengths or personality or connect with the hiring manager. Pro tip: Come up with a stalling tactic to buy yourself some thinking time, such as saying, “Now, that is a great question. I think I would have to say… ”

Drinking at the water cooler together is not the best example. Think of how you can collaborate with teammates to generate new ideas, to create initiatives to impact the business' success for the better (specifically in the department that you're applying for). For example, if you're applying to marketing, collaboration could mean discussing new ways of social media advertising to reach an audience of over a million people to strengthen the brand awareness of the company.

A good leader provides constructive criticism, motivates and inspires, coaches the mentee to be successful with their set of skills, and encourages them to push themselves. A bad leader only cares about his/her own interests and does not look out for the success of his/her staff.

Again, be honest about sharing a story here about someone who may not have gotten along with you in the office here and explain how you were able to fix that relationship or change your attitude/action to be a better person / coworker.

This question presents an excellent opportunity for you to discuss your education, qualifications and personal traits. You might say something like “I studied property management as well as behavior during my college years and I have two years’ experience in real estate.
I can gauge the homes or apartments in which clients will be interested based solely upon the needs of their families. Finally, my organizational skills will allow me to schedule appointments or showings confidently and arrive for them punctually.” This shows your interviewer that you have all of the skills necessary to become successful not only for yourself, but also for your employer.

Make sure you research the industry first. Then find at least 3 core things about that industry that you're passionate about (for example: how their solutions impact clients, their culture, the leadership, etc)

You should be proud of all your achievements As Bench Inspector! We just don't have time to hear them all as interviewers most likely. Focus on 1 really good achievement that showcases characteristics like the following: Integrity, competitiveness, resourcefulness, intelligence, persistence, and so forth.