VoIP IP Telephony Interview Preparation Guide

Elevate your Telephony VoIP IP interview readiness with our detailed compilation of 11 questions. Our questions cover a wide range of topics in Telephony VoIP IP to ensure youre well-prepared. Whether youre new to the field or have years of experience, these questions are designed to help you succeed. Download the free PDF now to get all 11 questions and ensure youre well-prepared for your Telephony VoIP IP interview. This resource is perfect for in-depth preparation and boosting your confidence.
Tweet Share WhatsApp

11 Telephony VoIP IP Questions and Answers:

1 :: Explain the IPV4 and IPv6 address bit?

yes IPV6 is advanced version of IPV4.
the address of IPV^ is 128 bits with extend able memory and
that of IPV$ is 32 bits.
Download PDFRead All Telephony VoIP IP Questions

2 :: What is IP addresses range A,B,C,D,E?

0.0.0.0 126.255.255.255--class-A
127.0.0.0 127.255.255.255--LoopBack IP address.
128.0.0.0 191.255.255.255--class-B
192.0.0.0 223.255.255.255--class-C
224.0.0.0 239.255.255.255--class-D
240.0.0.0 255.255.255.255--class-E

3 :: Tell me voip test setup that you have for testing?

Press and release the mute button , than press the
following number on dialpad 8378# ( TEST ) , This start
self test.

4 :: Explain url?

URL stands for : Uniform Resource Locator.
To access information over internet using web browser URL
is used as a address to access particular web site.

URL is the convertion of IP to human understandable form.
Users give the name of website in the browser which is
later on converted to IP address by DNS server. And the
request page is send to users browser.

5 :: Do you know in voip telephone witch part will convert data anolog to digital, digital to anolog?

A codec (Coder/Decoder) converts analog signals to a
digital bitstream, and another identical codec at the far
end of the communication converts the digital bitstream
back into an analog signal.

In the VoIP world, codec's are used to encode voice for
transmission across IP networks.

Codec's for VoIP use are also referred to as vocoders,
for "voice encoders".

Codecs generally provide a compression capability to save
network bandwidth. Some codecs also support silence
suppression, where silence is not encoded or transmitted.
Regards
Download PDFRead All Telephony VoIP IP Questions

6 :: Explain How does VOIP work?

The basic principle of Voip is very simple. It's the same
technology you have probably used already to listen to
music over the Internet. Voice sounds are picked up by a
microphone and digitized by the sound card. The sounds are
then converted to a compressed form, compact enough to be
sent in real time over the Internet, using a software
driver called a codec. The term codec is short
for "encoder/decoder". The sounds are encoded at the
sending end, sent over the Internet and then decoded at the
receiving end, where they are played back over the
speakers. The only requirements are a connection between
the two computers of an adequate speed, and matching codecs
at each end.

To be usable, a Voip system also needs a method for
establishing and managing a connection, for example,
calling the other computer, finding out if they accept the
call, and closing the connection when a user hangs up.
Because Voip allows two way communication, and even
conference calls, it's a lot more complicated than simple
audio streaming. How calls are managed is the area in which
Voip systems fundamentally differ, and two Voip users must
be using the same system (or compatible ones) in order to
be able to call each other.

Because most Internet users don't have a permanent Internet
address (IP address, a number like 212.44.88.17 that
uniquely identifies that computer, at that moment), Voip
systems don't generally work by calling another computer
direct  although that may be an option for those who do
have a permanent address. Instead, each user of the service
registers with an intermediate server, which maintains a
record of their IP address all the time they are connected.
An example of a Voip application that works this way is
Picophone. The small size of the PicoPhone application file
(about 64Kb, barely larger than Windows Notepad)
demonstrates clearly that the basic principles of Voip are
not complicated to implement.

Another reason for using an intermediate server is that it
eases the problem of getting Voip to work through the
firewalls that everyone uses these days. Many firewalls
block any data from the Internet that is not sent in
response to a specific request. This makes it impossible to
call another computer direct. Because the called computer
did not request any data from the caller, the call request
would be blocked. By establishing a connection with a
server, the Voip software opens a channel of communication
through which other computers can call it. Communication
may continue using the server, or information may be passed
via the server that allows the two computers to open a
direct connection between them and continue using that.

7 :: What do internet telephony, packet telephony, IP telephony and converged network means?

The first thing all mean the same thing. Which is using IP
(Internet protocol) for voice services. Some voice networks
are only packet-switched and have no access outside of
their own VoIP network. Most VoIP networks have a Gateway
that connects to a circuit-switched external network which
gives them acces to external calling. One of the gateways
responsibilites is to convert G.711 Circuit-switched media
(typically a T1 provided by a telco company) to the 7.723
Packet-switched media that will traverse the companies VoIP
network. A device called a gatekeeper will then convert the
IP address (used by H.323 protocol) to a standard telephone
number (E.164 address) that can be used for external
calling.

A converged network is a network that passes both Voice and
Data over the same set of devices. Converged networks
generally implement QoS (Quality of service) on all actived
network devices to ensure the VoIP has priority over
standard data because of it's more rigid demands.

8 :: Explain VOIP?

VOIP means voice over internet protocol. In which the voice is send through internet (or any IP network). For that the analog voice is converted into digital
data and use appropriate CODEC (for bandwidth saving) and send through IP
network. At the receiving end the digital data is converted back into analog
voice.

9 :: Explain What are the advantages to VoIP?

The big advantage is VoIP may save you money depending on
how much you are currently spending for local and long-
distance calls. What you will need to do is get the total
cost the phone company is charging and compare it against a
VoIP plan that interests you. With most plans, you get free
calls within the U.S. and Canada for a low flat rate.
International calls usually have very low rates with no
connection fees. For both residential customers and
businesses that make a lot of long distance and
international calls, the savings can be several hundred
dollars a year.

Another advantage is with the features available with VoIP.
Features such as caller ID, call waiting, call forwarding,
3 way conferencing and voice mail are usually included at
no extra cost. With the phone company, these services are
usually extra.

In addition, you can make free phone calls anywhere there
is a high speed Internet connection available. That means
you can be in another state or even in another country and
make calls as if you were back at your home or business.
You will just need to bring your phone adapter along with
you and possibly a phone in case one is not available

10 :: Tell me What equipment is needed for VoIP?

The main requirement is a broadband Internet connection
such as DSL or cable. Any other equipment such as a
telephone adapter or microphone usually comes with the VoIP
service provider.
Download PDFRead All Telephony VoIP IP Questions