Petroleum Engineering Interview Preparation Guide

Petroleum Engineering frequently Asked Questions by expert members with experience in Petroleum Engineering. These questions and answers will help you strengthen your technical skills, prepare for the new job test and quickly revise the concepts

341 Petroleum Engineering Questions and Answers:

1 :: Diesel used in naval applications has a minimum cetane number of

A. 25
B. 35
C. 45
D. 65

Option C

Download Petroleum Engineering PDF Read All 341 Petroleum Engineering Questions

2 :: Which of the following tests is not done for transformer oil?

A. Flash point and acid value.
B. Aniline point.
C. Dielectric strength.
D. Copper strip corrosion test.

Option B

3 :: Which is the most undesirable component in kerosene?

A. Aromatics
B. i-paraffins
C. n-paraffins
D. Naphthenes

Option A

4 :: Pick out the wrong statement about the smoking tendency of various hydrocarbon constituents of kerosene.

A. Smoking tendency of hydrocarbons increases in the order : paraffins → isoparaffins → naphthenes → aromatics.
B. Smoking tendency of paraffin's increases with decrease in its molecular weight.
C. Smoking tendency of naphthenes decreases with its increasing molecular weight & also on addition of double bond.
D. Smoking tendency of aromatics decreases with increase in its molecular weight.

Option B

5 :: Solvent used in duo-sol extraction for lube oil upgradation is a mixture of

A. propane & phenol-cresol mixture.
B. methyl ethyl ketone & glycol.
C. phenol & furfural.
D. propane & liquid sulphur dioxide.

Option A

Download Petroleum Engineering PDF Read All 341 Petroleum Engineering Questions

6 :: Which of the following fractions of a crude oil will have the maximum gravity API (i.e. °API)?

A. Diesel
B. Gasoline
C. Atmospheric gas oil
D. Vacuum gas oil

Option C

7 :: For gasoline, the flash point (<50°C) is determined by the

A. Abel apparatus.
B. Pensky-Marten's apparatus.
C. Saybolt chromometer.
D. none of these.

Option D

8 :: Flash point of atmospheric distillation residue is determined by __________ apparates.

A. Pensky-Martens (closed cup type).
B. Abel.
C. Cleveland (open cup type)
D. none of these.

Option C

9 :: Maximum sulphur percentage in low sulphur heavy stock (LSHS) furnace oil is about

A. 0.1
B. 1
C. 2.5
D. 3.5

Option B

10 :: Pour point and freezing point is equal for

A. petrol
B. diesel
C. water
D. crude petroleum

Option C

Download Petroleum Engineering PDF Read All 341 Petroleum Engineering Questions