Electrician Drilling Rig Chief Interview Preparation Guide

80 Electrician Drilling Rig Chief Questions and Answers:

1 :: Tell me about the most fun you have had on the job?

When answering this question, discuss situations where you completed tasks benefitting your previous employers.
Download Electrician Drilling Rig Chief PDF Read All 80 Electrician Drilling Rig Chief Questions

2 :: What is your philosophy towards work?

This is typically a straightforward question that merits a straightforward answer. Do you have strong worth ethic? Will you do whatever it takes to make sure the job gets done? Just say so in your response. Keep it short, direct and positive.

3 :: What education or training have you had that makes you fit for this profession As Electrician Drilling Rig Chief?

This would be the first question asked in any interview. Therefore, it is important that you give a proper reply to the question regarding your education. You should have all the documents and certificates pertaining to your education and/or training, although time may not allow the interviewer to review all of them.

4 :: Give me a specific example of a time when you had to conform to a policy with which you did not agree?

You want to first understand why the policy was put into effect. From there, if you truly disagree with it, explain your position to your management. If they don't change it, then you must accept their decision and continue to work or the alternative decision would be to find a new job.

5 :: If you were hiring a person for this job As Electrician Drilling Rig Chief, what would you look for?

Discuss qualities you possess required to successfully complete the job duties.

6 :: Your coworker highlights your mistakes in front of everyone, how do you handle the situation?

Admit to the mistake without being emotional, but then discuss how you are being proactive in getting it fixed. Lastly, pull the co-worker aside later on to tell them that you'd appreciate it if they gave you the feedback 1:1 first before throwing you under the bus.

7 :: What five words would be describe you as Electrician Drilling Rig Chief?

The hiring manager requests this of you because she wants to know more about your individual personality. This list can reveal a lot to her about who you are and how you might fit into the workplace. Your answer also gives the manager an indication of your self-perception, which is a good indicator of the type of employee you will be.

8 :: Tell us something about yourself?

Bad Answer: Candidates who ramble on about themselves without regard for information that will actually help the interviewer make a decision, or candidates who actually provide information showing they are unfit for the job.

Good answer: An answer that gives the interviewer a glimpse of the candidate's personality, without veering away from providing information that relates to the job. Answers should be positive, and not generic.

9 :: Describe a time when you put your needs aside to help a co-worker understand a task. How did you assist them? What was the result?

The key is to show that the mentoring of a co-worker was first a higher priority than the task you had at hand (remember, you want to show that you focus on highest priority tasks first). Then, describe in detail how you helped them not only complete the task but learn to do it on their own. You want to teach them HOW to fish and not to simply fish for them.

10 :: Do you know anyone that works with our company?

Sometimes companies have policies relating to the hiring of individuals related to current company employees. If you are related to anyone working for the company make sure you're aware of company policies before you enter the interview. If you have a friend or acquaintance working for the company make sure have good relationship with this individual before mentioning them.
Download Electrician Drilling Rig Chief PDF Read All 80 Electrician Drilling Rig Chief Questions

11 :: What are your weaknesses for Electrician Drilling Rig Chief position?

Try not to be too critical when answering this question. Instead, pick one of your weaknesses and try to turn it into a positive.
For example, you could be a perfectionist, which means that you sometimes take longer on tasks, but you make sure that they are completed to a high quality. It is important to make a negative into a positive as it doesn’t make you appear overly critical and shows you can reflect on your own performance.

12 :: What's your management style?

The best managers are strong but flexible, and that's exactly what you want to show off in your answer. (Think something like, “While every situation and every team member requires a bit of a different strategy, I tend to approach my employee relationships as a coach...”) Then, share a couple of your best managerial moments, like when you grew your team from five to 15 or coached an underperforming employee to become the company's top employee.

13 :: Are you good at working in a team As Electrician Drilling Rig Chief?

Before you answer, consider how you best contribute to a team:

☛ Do you get along easily with people?
☛ Are you an effective collaborator?
☛ Can you communicate with people from various backgrounds and with different personalities?
☛ Can you motivate people?
☛ Do you know how to push back tactfully?
☛ Can you mediate conflicts?
☛ Can you deal with difficult personalities?

14 :: Why was there a gap in your employment As Electrician Drilling Rig Chief?

If you were unemployed for a period of time, be direct and to the point about what you’ve been up to (and hopefully, that’s a litany of impressive volunteer and other mind-enriching activities, like blogging or taking classes). Then, steer the conversation toward how you will do the job and contribute to the organization: “I decided to take a break at the time, but today I’m ready to contribute to this organization in the following ways.”

15 :: How do you evaluate success As Electrician Drilling Rig Chief?

I evaluate success As Electrician Drilling Rig Chief in different ways. At work, it is meeting the goals set by my supervisors and my fellow workers. It is my understanding, from talking to other employees, that the Global Guideline company is recognized for not only rewarding success but giving employees opportunity to grow as well.

16 :: What position do you prefer on a team working on a project?

Do not claim to be comfortable with a specific role if you in are in fact not comfortable with it. However, if you have no problem working in certain roles or situations, be sure to discuss this with the interviewer.

17 :: Top 17 Behavioral Interview Questions As Electrician Drilling Rig Chief:

Behavioral interviews As Electrician Drilling Rig Chief where popularized by industrial psychologists in the 1970s, and have been used at big companies like AT&T. The idea behind them is that past responses to situations are the best predictor of how candidates will respond in the future.


1. Tell me about a time you faced a conflict while working as part of a team.

2. Talk about a goal you set for yourself. What did you do to make sure you met the goal?

3. Give an example of a time when you had to work with someone with a very different personality from yours.

4. Talk about an instance where you wish you’d handled a situation differently with a team member.

5. What’s the most difficult problem you have had to solve As Electrician Drilling Rig Chief?

6. Give an example of how you handled a situation where you needed information from a colleague who wasn’t responsive.

7. Talk about a time when you had problems building a relationship with a key team member. What did you do?

8. Tell me about an instance when it was important to make a great impression on a client. What did you do?

9. Tell me about a situation where you had to work with a difficult client.

10. Tell me about a situation where you disappointed a client, and how you tried to fix it.

11. Talk about a time when you had to strategize to meet all your obligations.

12. Talk about a time when you failed at something. How did you react?

13. Talk about a time you took on a leadership role.

14. Tell me about a long-term project you oversaw. How did you keep it focused and on schedule?

15. Talk about a time when you were under a lot of stress. What caused it, and how did you manage?

16. Do you prefer to work alone or with others As Electrician Drilling Rig Chief?

17. Tell me about a time when you were overwhelmed by the amount of work on your agenda. How did you handle it?

18 :: Tell us about a typical day at work. How does it start? What do you do?

At the beginning of each day, I inspect the work site to make sure that it is hazard-free. Once the work site is secured, I verify that all tools and equipment are adequate in supply. As soon as the work orders are delivered, I provide workers with security guidelines and carry out drills. During the workday, it is my duty to monitor workers to ensure that they are working according to the enforced safety policies and that any problems or accidents are quickly addressed.

19 :: Basic 15 Interview Questions that Test Communication Skills As Electrician Drilling Rig Chief:

For most jobs, communication skills As Electrician Drilling Rig Chief are important. It's hard to work as a team if people aren't communicating well.

At some jobs, like customer service or sales, communication skills are an absolute essential.

These questions are meant to help gauge a candidate's ability to communicate.

1. How do you prefer to build rapport with others?

2. How would you go about simplifying a complex issue in order to explain it to a client or colleague?

3. How would you go about persuading someone to see things your way at work?

4. How would you go about explaining a complex idea/problem to a client who was already frustrated?

5. What would you do if you there was a breakdown in communication at work?

6. Talk about a successful presentation you gave and why you think it did well.

7. How would you explain a complicated technical problem to a colleague with less technical understanding?

8. Do you prefer written or verbal communication As Electrician Drilling Rig Chief?

9. Describe a time when you had to be careful talking about sensitive information. How did you do it?

10. What would you do if you misunderstood an important communication on the job?

11. Talk about a time when you made a point that you knew your colleagues would be resistant to.

12. Is it more important to be a good listener or a good communicator As Electrician Drilling Rig Chief?

13. Tell me about a time you had to relay bad news to a client or colleague.

14. Rate your communication skills on a scale of 1 to 10. Give examples of experiences that demonstrate the rating is accurate.

15. How have you handled working under someone you felt was not good at communicating?

20 :: What makes you right for this position?

This question can be tricky because you need to show your worth As Electrician Drilling Rig Chief without sounding cocky or arrogant. Research the business ahead of time and become familiar with its mission and values. Take the time to figure out how your personal qualities fit the needs of the business and use that fit to provide your answer.
Download Electrician Drilling Rig Chief PDF Read All 80 Electrician Drilling Rig Chief Questions

21 :: Tell me about a time you failed?

Everyone has failed, so don't play dumb or claim you've never messed up As Electrician Drilling Rig Chief. Think of a time when a work-related situation didn't turn out quite as you had hoped. An interviewer is interested in seeing how you took responsibility for your failure, what you learned from it, and how you would prevent similar failures from happening again.

22 :: Give me an example of a time when you set a goal and were able to meet or achieve it?

Show that you set great goals and the process and steps you took to achieve it. Details really matter here.

23 :: What motivates you at the work place?

Keep your answer simple, direct and positive. Some good answers may be the ability to achieve, recognition or challenging assignments.

24 :: Top 11 Interview Questions to Ask when Emotional Intelligence Matters As Electrician Drilling Rig Chief:

Emotional intelligence, or EQ, has come into vogue as a good trait to hire for.

EQ is the ability to use emotional information to guide thinking and behavior, to recognize other people's emotions and your own, and to discriminate between different feelings and label them appropriately.

EQ is considered essential to help teams function well. Here are some of the top questions for help you get an idea of how candidates perceive their emotions and those of others.

1. If you started a company today, what would its top values be?

2. Who inspires you? Why?

3. How could you create more balance in your life?

4. What makes you angry?

5. How do you have fun?

6. How good are you at asking for help?

7. How did you deal with a bad day?

8. What's something you're really proud of? Why?

9. Tell me about a time when your mood altered your performance (positively or negatively).

10. Has there ever been a time when you felt you needed to change your behavior at work? How did you do it?

11. Did you create friendships that lasted while working at a previous job?

25 :: If you had enough money to retire would you?

Just be honest. If you would retire then say so. But since you can't retire, and the interviewer already knows this, simply answer that since you can't this is type of work you prefer doing. However, if you wouldn't retire if you had the money then explain why. Work is an important element of happiness for most people and many won't retire even when they can.

26 :: Why do you want to work for this company?

Again be honest. The interviewer will be able to sense very quickly if you're be disingenuous. Your answer should be base on your person reasons, career aspirations as well as research you've performed on the company. The most important thing you should do is make sure to relate your answer to your long-term career goals.

27 :: What do you consider to be your weaknesses?

What your interviewer is really trying to do with this question—beyond identifying any major red flags—is to gauge your self-awareness and honesty. So, “I can't meet a deadline to save my life As Electrician Drilling Rig Chief” is not an option—but neither is “Nothing! I'm perfect!” Strike a balance by thinking of something that you struggle with but that you’re working to improve. For example, maybe you’ve never been strong at public speaking, but you've recently volunteered to run meetings to help you be more comfortable when addressing a crowd.

28 :: What type of mentors do you seek out and why?

Think of your top 3 mentors and what attributes they exhibit that you want to emulate. Common attributes include passion, desire, will, leadership, ability to influence others, intelligence.

29 :: What did you major in and why?

Tell them your major and the motivations behind why you chose it and how it's helped to prep your of this potential job.

30 :: If hired, how do you intend on making a difference with our company?

Dedicate myself to learn everything about the new company that I can, look for ways and ideas that could improve, processes, safety, removing obstacles from the associates, I want to advance within the company.
Download Electrician Drilling Rig Chief PDF Read All 80 Electrician Drilling Rig Chief Questions