Bluetooth Devices Interview Preparation Guide

Bluetooth Special Interest Group (SIG)

Bluetooth wireless technology is revolutionizing personal connectivity by providing freedom from wired connections. It is a specification for a small-form factor, low-cost radio solution providing links between mobile computers, mobile phones, other portable handheld devices and automobiles, as well as connectivity to the Internet. The Bluetooth SIG, comprised of leaders in the telecommunications, computing, automotive and consumer electronics industries, is driving development of the technology and bringing it to market. The Bluetooth SIG includes Promoter member companies Agere, Ericsson, IBM, Intel, Microsoft, Motorola, Nokia and Toshiba, and thousands of Associate and Adopter member companies. The Bluetooth SIG, Inc. headquarters are located in Overland Park, Kansas, U.S.A.

Bluetooth uses the SAFER+ algorithm for authentication and key generation. The E0 stream cipher is used for encrypting packets. This makes eavesdropping on Bluetooth-enabled devices more difficult.

Pairs of devices may establish a trusted relationship by learning (by user input) a shared secret known as a “passkey”. A device that wants to communicate only with a trusted device can cryptographically authenticate the identity of the other device. Trusted devices may also encrypt the data that they exchange over the air so that no one can listen in. The encryption can however be turned off and passkeys are stored on the device’s file system and not the Bluetooth chip itself. Since the Bluetooth address is permanent a pairing will be preserved even if the Bluetooth name is changed. Pairs can be deleted at any time by either device. Devices will generally require pairing or will prompt the owner before it allows a remote device to use any or most of its services. Some devices such as Sony Ericsson phones will usually accept OBEX business cards and notes without any pairing or prompts. Certain printers and access points will allow any device to use its services by default much like unsecured Wi-Fi networks.

A Bluetooth device playing the role of the “master” can communicate with up to 7 devices playing the role of the “slave”. This network of “group of up to 8 devices” (1 master + 7 slaves) is called a piconet. A piconet is an ad-hoc computer network of devices using Bluetooth technology protocols to allow one master device to interconnect with up to seven active slave devices (because a three-bit MAC address is used). Up to 255 further slave devices can be inactive, or parked, which the master device can bring into active status at any time.

* Wireless control of and communication between a cell phone and a hands free headset or car kit. This is the most popular use.
* Wireless networking between PCs in a confined space and where little bandwidth is required.
* Wireless communications with PC input devices such as mouses and keyboards and output devices such as printers.
* Transfer of files between devices via OBEX.
* Transfer of contact details, calendar appointments, and reminders between devices via OBEX.
* Replacement of traditional wired serial communications in test equipment, GPS receivers and medical equipment.
* For remote controls where infrared was traditionally used.
* Sending small advertisements from Bluetooth enabled advertising hoardings to other, discoverable, Bluetooth devices.
* Wireless control of a games console, Nintendo’s Wii and Sony’s PlayStation 3 will both use Bluetooth technology for their wireless controllers.
* Sending commands and software to the upcoming LEGO Mindstorms NXT instead of infra red.

The main features of Bluetooth Core Specification Version 2.0 + EDR are:
• 3 times faster transmission speed (up to 10 times in certain cases)
• Lower power consumption through reduced duty cycle
• Simplification of multi-link scenarios due to more available bandwidth
• Backwards compatible to earlier versions
• Further improved BER (Bit Error Rate) performance

Being an IEEE standard will be a big plus to widespread adoption of Bluetooth, and IEEE 802.15 working group for personal area networks (PAN) announced that they will be adopting Bluetooth as the IEEE 802.15 standard.

Bluetooth wireless technology is a de facto standard, as well as a specification for small-form factor, low-cost, short range radio links between mobile PCs, mobile phones and other portable devices. The Bluetooth Special Interest Group is an industry group consisting of leaders in the telecommunications, computing, and networking industries that are driving development of the technology and bringing it to market

Bluetooth was initiated by Ericsson, IBM, Intel, Nokia and Toshiba in early 1998. These companies later formed a special interest group known as the Bluetooth SIG. The Bluetooth 1.0 specifications were released on July 26, 1999, but the technology has only recently become inexpensive enough for widespread use.

The 802.11b (WiFi) standard is commonly used for wireless networking. Bluetooth is not a competitor with 802.11b, but rather a complement to it. While 802.11b is generally a replacement for wired local area networking, Bluetooth is more commonly used as a replacement for cables between individual devices. Bluetooth is designed to link devices within a very short range (up to 33 feet ). Bluetooth is part of the 802.15 standard.