Inspector Quality Assurance/QC Interview Questions & Answers

Download PDF

QCP (QUALITY CONTROL PROCEDURE) is a procedures that complements the ITP, by providing information that cannot practically be included in the ITP , but is necessary in order to perform control inspection and test .

The systematic and independent examination for determining the quality of activities is known as quality audit. It allows the cross check for the planned arrangements, whether they are properly implemented or not.

To ensure that the system wiring from field to control console functioning fine.

Assurance is provided by organization management, it means giving a positive declaration on a product which obtains confidence for the outcome. It gives a security that the product will work without any glitches as per the expectations or requests.

A project specification specifies the minimum requirements according to the design and relevant international codes and standards.

Quality is meeting the requirement, expectation and needs of the customer being free from defects, lacks and substantial variants. There are standards needs to follow to satisfy the customer requirements.

CRUD testing is another name for Black Box testing. CRUD stands for Create, Read, Update and Delete.

I would like to learn a new and rewarding position.

Standard height to install the instruments is 1.4 meter but it can very less or more as per locations convenience.

Build: It is a number given to Installable software that is given to testing team by the development team.

Release: It is a number given to Installable software that is handed over to customer by the tester or developer.

☛ The strategy for Automation Test Plan
☛ Preparation of Automation Test Plan
☛ Recording the scenario
☛ Error handler incorporation
☛ Script enhancement by inserting check points and looping constructs
☛ Debugging the script and fixing the issues
☛ Rerunning the script
☛ Reporting the result

Open loop; A loop system which operates direct without any feedback and it generates the output in response to an input signal.

Closed Loop; A loop system which uses measurement of the output signal through feedback and a comparison with the desired output to generate and error signal that is applied to the actuator.

A thread testing is a top-down testing, where the progressive integration of components follows the implementation of subsets of the requirements, as opposed to the integration of components by successively lower levels.

Identify the non-conformity of the products.

As the dependencies on the clients are more, the client or server applications are complex.

The testing needs are extensive as servers, communications and hardware are interdependent. Integration and system testing is also for a limited period of time.

Testware is the subset of software, which helps in performing the testing of application. It is a term given to the combination of software application and utilities which is required for testing a software package.

I got some boards back in RMA and found that there was an ongoing problem and that the line lead had mentioned to the engineer but the issue never got resolved so after some investigating and getting other engineers and quality persons involved we got the ball rolling on the issue and hopefully in the very near future we will have a new vendor and process and less RMA. So I also think this will save the company money.

It is a process to control and document any changes made during the life of a project. Release control, Change control and Revision control are the important aspects of configuration management.

Bug release is when software or an application is handed over to the testing team knowing that the defect is present in a release. During this the priority and severity of bug is low, as bug can be removed before the final handover.

Bug leakage is something, when the bug is discovered by the end users or customer, and missed by the testing team to detect, while testing the software.

ITP means inspection and test plan, details of work scope and required types of Inspections Hold point (H) is the level of inspection that client inspection must required through RFI and cannot be proceeded until inspection is done by client. Witness point (W) is the level of inspection that inspection activity can be proceeded without client inspection or if client is not available as per RFI timing.

I was struggling with my physical activity in wouldn't want to go do anything so I start pushing myself and just keeping it on my mind of all the struggles you face if you don't and all the negative impact it would have on me so I started ond day at a time an now I am almost to 5 days a week.

ISO means international standard organization some of them are as below;
ISO;9001, ISO;9002, ISO,9003 etc.

☛ Exploitation of automation tool
☛ Frequency of use of test case
☛ Reusability of Automation script
☛ Adaptability of test case for automation

A software quality assurance engineer tasks include following things

☛ Writing source code
☛ Software design
☛ Control of source code
☛ Reviewing code
☛ Change management
☛ Configuration management
☛ Integration of software
☛ Program testing
☛ Release management process