Intel Microprocessor Question:
Explain the characteristics of the RS232C and RS422A standards?
Answer:
The characteristics of RS232C are as follows:
- This standard has been defined for communication that is asynchronous. The timing between data bits are specified whereas the timing between two characters is not fixed.
- This standard guarantees 50 ft coverage and 25 signal lines are defined by it.
- For each direction only a single wire is defined.
The characteristics of the RS422A standard are as follows:
- The data rate of this standard is 10Mbits/sec.
- In this standard every signal is considered to be a pair of wires and the voltage difference between them is sensed by the receiver.
- This standard has been defined for communication that is asynchronous. The timing between data bits are specified whereas the timing between two characters is not fixed.
- This standard guarantees 50 ft coverage and 25 signal lines are defined by it.
- For each direction only a single wire is defined.
The characteristics of the RS422A standard are as follows:
- The data rate of this standard is 10Mbits/sec.
- In this standard every signal is considered to be a pair of wires and the voltage difference between them is sensed by the receiver.
| Previous Question | Next Question |
| Write a program in assembly language to find out one`s and two`s complement for an 8 bit number? | What are the various types of addressing modes for microprocessors? |