Production Engineer Interview Preparation Guide Download PDF
Production Engineer Frequently Asked Questions in various Production Engineer job Interviews by interviewer. The set of questions here ensures that you offer a perfect answer posed to you. So get preparation for your new job hunting
52 Production Engineer Questions and Answers:
3 :: Side rake angle of a single point cutting tool is the angle:
A. by which the face of the tool is inclined towards back
B. by which the face of the tool is inclined sideways
C. between the surface of the flank immediately below the point and a plane at right angles to the centre line of the point of the tool
D. between the surface of the flank immediately below the point and a line drawn from the point perpendicular to the base
B. by which the face of the tool is inclined sideways
5 :: In order to prevent tool from rubbing the work __________ on tools are provided.
A. rake angles
B. relief angles
B. relief angles
6 :: The silicon carbide abrasive is chiefly used for grinding:
A. cemented carbide
B. ceramic
C. cast iron
D. all of these
D. all of these
7 :: Drilling is an example of:
A. orthogonal cutting
B. oblique cutting
C. simple cutting
D. uniform cutting
B. oblique cutting
9 :: When the cutting edge of the tool is dull, then during machining:
A. continuous chips are formed
B. discontinuous chips are formed
C. continuous chips with built-up edge are formed
D. no chips are formed
C. continuous chips with built-up edge are formed
10 :: Internal gears can be made by:
A. hobbing
B. shaping with pinion cutter
C. shaping with rack cutter
D. milling
B. shaping with pinion cutter